Now you can 3D-print things that connect to Wi-Fi without batteries or electronics
Researchers at the University of Washington have created a range of 3D-printed plastic objects that can communicate with a router even though they're not connected to the internet and don't contain any electronics.
Tech Pro Research
The technique the researchers used to enable 3D-printed Wi-Fi is called 'Wi-Fi backscatter'. It typically relies on electronic components to reflect or absorb radio signals from a Wi-Fi router.
They substituted electrical components with printable springs, gears and switches using plastic, while an antenna was printed with a conductive 3D-printing filament made of plastic and copper.
The idea is to print things like a sensor for a washing detergent bottle that can detect when it's running low and communicate with a smartphone for reordering supplies.
The printed gear system encodes the 0s and 1s via the presence or absence of teeth in a plastic cog. The setup is also connected to a coil that toggles a switch made of conductive plastic that changes the state of the antenna.
Placed on a detergent bottle, the speed at which the gears turn estimates how much liquid is flowing out. A receiver can then monitor the bottle's level and send a message to a smartphone app when it falls below a certain level.
The researchers also printed a wind meter, a water flow meter, and a scale, as well as various widgets such as buttons, knobs, and sliders.
Another technique they used to make 3D components that can communicate with smart devices was to create 3D-printed MagLink objects, which are encoded with magnetic fields.
For this system, the researchers used a Nexus 5's magnetometers to receive data from the objects. The two different states are determined by the materials used to print the object. For 0 they used plastic and for a 1 they used a ferromagnetic plastic consisting of iron filings.
The researchers have released designs for the components as well as links to sources for materials.
Previous and related coverage
Is Germany right to tell parents to destroy kids' smartwatches over snooping fears?
After banning smart dolls, Germany now says no to smartwatches that allow parents to listen in on classrooms.
Security vulnerability in IoT cameras could allow remote control by hackers
More Internet of Things security holes found in one of the most common forms of internet-connected cameras.
Read more on IoT
- AI and Internet of Things will drive digital transformation through 2020
- Do you own your data and have free rein? The answer in an Internet of things, cloud world may surprise you
- Your terrible broadband will kill the Internet of Things dead
- UX needs to operate under a new set of rules within the Internet of Things
- 17 ways the Internet of Things is changing the world (TechRepublic)
- Congress to smart device makers: Your security sucks (CNET)