X

Google Nexus S Teardown

Bill Detwiler cracks open the Google Nexus S Android smartphone. Made by Samsung, the phone contains chips from SanDisk, Wolfson, Infineon, and Atmel.
By Bill Detwiler, Contributor
6189264.jpg
1 of 62 Bill Detwiler/ZDNET

In December 2010, Google partnered with Samsung to release the Nexus S--a variant of Samsung's Galaxy S line of phones.

Check out our teardown of the Samsung Galaxy S Captivate.

After testing the device, TechRepublic's Jason Hiner was less than enthusiastic about the new device:

"Overall, the Google Nexus S feels like a step backward for the Nexus line of “Google phones,” and not just because of Google’s less ambitious agenda with the product. The Nexus S just doesn’t offer enough important hardware upgrades from the Nexus One to make up for the lower build quality."

Despite Jason's lackluster review, we wanted to see the hardware inside this new Google phone. So, follow along as we crack open the Nexus S.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189265.jpg
2 of 62 Bill Detwiler/ZDNET

The Nexus S is available at Best Buy in the US and Carphone Wharehouse in the UK. The phone is sold unlocked and will work on T-Mobile (US and UK), Vodaphone (UK), Orange (UK), O2 (UK).

The Nexus S costs $199 US (with 2-year contract) and $529 (no contract).


Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189266.jpg
3 of 62 Bill Detwiler/ZDNET

The Nexus S runs Android 2.3 (Gingerbread), comes with a 1.0 GHz Cortex A8 (Hummingbird), 512MB RAM, 16GB built-in storage, and a 4-inch Super AMOLED WVGA (800×480) display.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189267.jpg
4 of 62 Bill Detwiler/ZDNET

From left to right, the Nexus S, Nexus One, and G1 smartphones.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189268.jpg
5 of 62 Bill Detwiler/ZDNET

The Nexus One and G1 were both manufactured by HTC. The Nexus S is manufuctured by Samsung.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189269.jpg
6 of 62 Bill Detwiler/ZDNET

The Nexus S weighs 4.55 ounces (129g) and measures4.88(h) x 2.48(w) x 0.43(d) inches. It also has an accelerometer, three-axis gyroscope, GPS, digital compass, proximity sensor, and ambient light sensor.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189270.jpg
7 of 62 Bill Detwiler/ZDNET

The Nexus S has a 5MP rear-facing camera with flash, autofocus, and video capability. It also has a front-facing VGA camera.

The device also supports Wi-Fi 802.11b/g/n, Bluetooth 2.1, and Near Field Communications (NFC).

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189271.jpg
8 of 62 Bill Detwiler/ZDNET

Along the bottom edge of the Nexus S are the microUSB 2.0 port and 3.5mm headset jack.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189272.jpg
9 of 62 Bill Detwiler/ZDNET

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189273.jpg
10 of 62 Bill Detwiler/ZDNET

Along the left side of the Nexus S is the volume up/down button.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189274.jpg
11 of 62 Bill Detwiler/ZDNET

Along the right side of the Nexus S is the power button.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189275.jpg
12 of 62 Bill Detwiler/ZDNET

Just like the Galaxy S, the first step in disassembling the Nexus S is to pop off the back cover.

Unlike the iPhone 4, the battery on the Nexus S is user replaceable.

Attached to the interior of the back cover is the paper-thin NFC antenna (covered with a black sticker). As I want to reassemble this phone in working order, I'm going to refrain from pealing the antenna off the back cover.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189276.jpg
13 of 62 Bill Detwiler/ZDNET

Once the back cover is off, you can remove the battery and SIM card.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189277.jpg
14 of 62 Bill Detwiler/ZDNET

Like the Samsung Galaxy S Captivate, the Nexus S uses a 3.7V, 5.55Wh, 1500 mAh Li-ion battery.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189278.jpg
15 of 62 Bill Detwiler/ZDNET

After removing the back cover, battery, and SIM card, you'll need to remove the six Phillips #00 screws that hold the inner cover in place.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189279.jpg
16 of 62 Bill Detwiler/ZDNET

Once the screws are removed, you can use a thin metal blade or plastic case opening tool to pry off the inner cover.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189280.jpg
17 of 62 Bill Detwiler/ZDNET

Take care when removing the inner cover, a thin plastic border surrounds the front half of the phone and snaps to the inner cover. Using too much force on the the inner cover, could break this edging.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189281.jpg
18 of 62 Bill Detwiler/ZDNET

With the inner cover removed, we get our first look inside the Nexus S.

There are similarities between the construction of the Samsung Galaxy S (Captivate) and Nexus S. For example, both have a main PCB with a smaller PCB (attached to an EMI shield) stacked on top.

But, there are also differences. The main PCB in the Nexus S runs the length of the phone and has a lower section. The main Galaxy S (Captivate)'s main PCB fills only the top portion of the device.


Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189282.jpg
19 of 62 Bill Detwiler/ZDNET

Our first step in removing the main PCB and attached internal components is to remove the three Phillips #00 screws that hold the main PCB to the Nexus S' internal frame.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189283.jpg
20 of 62 Bill Detwiler/ZDNET

We'll also need to detach several cables and connectors from the the main PCB before lifting it away from the Nexus S' frame.

This connector is likely for the small PCB located at the bottom of the phone.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189284.jpg
21 of 62 Bill Detwiler/ZDNET

This connector is likely for the display and digitizer.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189285.jpg
22 of 62 Bill Detwiler/ZDNET

With both connectors detached, you'll need to pop loose the vibration motor, which is held to the front half of the phone with a small amount of adhesive. Using a small metal blade, I was able to pry it loose without damaging it or the surrounding plastic.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189286.jpg
23 of 62 Bill Detwiler/ZDNET

I also suggest you also pop loose the small front speaker, which also sits in a small compartment.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189287.jpg
24 of 62 Bill Detwiler/ZDNET

With the screws removed, connectors detached, and vibration and front speaker dislodged, you can left the main PCB away from the rest of the Nexus S.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189288.jpg
25 of 62 Bill Detwiler/ZDNET

With the main PCB removed, we can see the internal metal frame, a smaller PCB along the device's bottom edge, and several chips associated with the Nexus S' touch-sensitive display.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189289.jpg
26 of 62 Bill Detwiler/ZDNET

The layout of these chips is very similar to the Samsung Galaxy S (Captivate).

And like its Samsung cousin, the Nexus S uses an Atmel touchscreen microcontroller. In this case, the Atmel MXT224.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189290.jpg
27 of 62 Bill Detwiler/ZDNET

The smaller PCB at the bottom of the Nexus S

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189291.jpg
28 of 62 Bill Detwiler/ZDNET

The cameras, speaker assembly, and stacked PCB are still attached to the main PCB. Next, we'll remove these components.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189292.jpg
29 of 62 Bill Detwiler/ZDNET

We'll start our component removal process on the back of the main PCB.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189293.jpg
30 of 62 Bill Detwiler/ZDNET

The camera assembly is connected to the main PCB with a thin ribbon cable.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189294.jpg
31 of 62 Bill Detwiler/ZDNET

Using a thin metal blade, genelty lift up on the camera connector's locking gate. With the gate open, you can remove the thin ribbon cable and lift the camera away from the main PCB.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189295.jpg
32 of 62 Bill Detwiler/ZDNET

The Nexus S' front- and rear-facing cameras are part of a single assembly.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189296.jpg
33 of 62 Bill Detwiler/ZDNET

The Nexus S has a 5MP rear-facing camera.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189297.jpg
34 of 62 Bill Detwiler/ZDNET

The Nexus S has a front-facing VGA camera that offers a resolution of 640 x 480 pixels.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189298.jpg
35 of 62 Bill Detwiler/ZDNET


Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189299.jpg
36 of 62 Bill Detwiler/ZDNET

Next, we'll remove the metal EMI shield and attached PCB from atop the main PCB. To do this, we'll need to detach its connector from the main PCB.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189300.jpg
37 of 62 Bill Detwiler/ZDNET

Once the smaller PCB's connector is detached, you can pry loose the EMI shield and attached PCB.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189301.jpg
38 of 62 Bill Detwiler/ZDNET


Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189302.jpg
39 of 62 Bill Detwiler/ZDNET

Located on the PCB attached to the EMI sheild are the SIM card reader and an NXP chip.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189303.jpg
40 of 62 Bill Detwiler/ZDNET

NXP chip with the markings 65N00 01 06 ZSD0371.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189304.jpg
41 of 62 Bill Detwiler/ZDNET


Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189305.jpg
42 of 62 Bill Detwiler/ZDNET

We can now remove the speaker assembly on the Nexus S. To do so, detach the assembly's connector from the main PCB.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189306.jpg
43 of 62 Bill Detwiler/ZDNET

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189307.jpg
44 of 62 Bill Detwiler/ZDNET

The Nexus S' speaker assembly contains both the front- and rear-facing speakers.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189308.jpg
45 of 62 Bill Detwiler/ZDNET

Along with the earpiece and speakerphone speakers, the speaker assembly also houses ambient light and proximity sensors (located on the small PCB).

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189309.jpg
46 of 62 Bill Detwiler/ZDNET

With the attached components removed, we can take a closer look at the chips on the main PCB.

As I noted earlier, the Nexus S has a PCB that spans the length of the device. The Samsung Galaxy S (Captivate) however, uses a smaller PCB located at the top of the phone.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189310.jpg
47 of 62 Bill Detwiler/ZDNET

This Samsung SWB-B23 Bluetooth IC was on the Samsung Focus (Windows Phone 7) and on the Samsung Galaxy S (Captivate).

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189311.jpg
48 of 62 Bill Detwiler/ZDNET

Unknown chip with markings 04AF 3974

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189312.jpg
49 of 62 Bill Detwiler/ZDNET

Unknown chip with markings B1W AT
Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189313.jpg
50 of 62 Bill Detwiler/ZDNET

Skyworks SKY77529 Tx Front-End Module (FEM) for Quad-Band GSM / EDGE

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189314.jpg
51 of 62 Bill Detwiler/ZDNET

This chip is an Infineon SMARTi UE - PMB 5703 single-chip dual-mode UMTS / EDGE Transceiver IC.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189315.jpg
52 of 62 Bill Detwiler/ZDNET

Series of three unknown chips with sequencial markings.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189316.jpg
53 of 62 Bill Detwiler/ZDNET

After exploring the chips on the front of the PCB, let's explore the back.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189317.jpg
54 of 62 Bill Detwiler/ZDNET

SanDisk SDIN4C2 16GB MLC NAND flash

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189318.jpg
55 of 62 Bill Detwiler/ZDNET

Infineon X-GOLD 616 baseband and SMARTi UE RF transceiver  with markings 8824 V1.0 XG616 TA G1041 YYN2K2738A2

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189319.jpg
56 of 62 Bill Detwiler/ZDNET

The Nexus S uses the Wolfson Microelectronics WM8994 audio codec. This is the same Wolfson audio chip used on the Samsung Galaxy Tab.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189320.jpg
57 of 62 Bill Detwiler/ZDNET

A round, white sticker covers the Nexus S' 1.0 GHz Cortex A8 (Hummingbird) processor.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189321.jpg
58 of 62 Bill Detwiler/ZDNET

Like the Samsung Galaxy S (Captivate), the Nexus S uses a 1.0 GHz Cortex A8 (Hummingbird) processor. This chip's markings are nearly identical to the Galaxy S chip.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189322.jpg
59 of 62 Bill Detwiler/ZDNET

Broadcom BCM4751 Integrated Monolithic GPS Receiver

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189323.jpg
60 of 62 Bill Detwiler/ZDNET

A collection of chips near the USB port.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189324.jpg
61 of 62 Bill Detwiler/ZDNET

The PCB has the markings GT-19020 REV1.1.

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

6189325.jpg
62 of 62 Bill Detwiler/ZDNET

Like the Samsung Galaxy S (Captivate), the Nexus S was rather easy to crack open. It has standard Phillips screws, has a user-serviceble battery, and many self-contained internal components (speakers, cameras, SIM card reader). Unfortunately, the front glass panel and screen are fused together. If you crack the glass, you'll need to replace the entire front panel.

The Nexus S has some nice features (a Super AMOLED display and NFC support), but I wonder if this Google phone arrive just a little too late to the party. Less than a month after the phone's release, manufacturers were showing off a host of Android phones running dual-core processors. The Nexus S' single-core chip will put it in the second tier of Android devices--not to mention the 2011 iPhone, which is rumored to have a dual-core processor. 

Photo by: Bill Detwiler / TechRepublic
Caption by: Bill Detwiler

Related Galleries

Holiday wallpaper for your phone: Christmas, Hanukkah, New Year's, and winter scenes
Holiday lights in Central Park background

Related Galleries

Holiday wallpaper for your phone: Christmas, Hanukkah, New Year's, and winter scenes

21 Photos
Winter backgrounds for your next virtual meeting
Wooden lodge in pine forest with heavy snow reflection on Lake O'hara at Yoho national park

Related Galleries

Winter backgrounds for your next virtual meeting

21 Photos
Holiday backgrounds for Zoom: Christmas cheer, New Year's Eve, Hanukkah and winter scenes
3D Rendering Christmas interior

Related Galleries

Holiday backgrounds for Zoom: Christmas cheer, New Year's Eve, Hanukkah and winter scenes

21 Photos
Hyundai Ioniq 5 and Kia EV6: Electric vehicle extravaganza
img-8825

Related Galleries

Hyundai Ioniq 5 and Kia EV6: Electric vehicle extravaganza

26 Photos
A weekend with Google's Chrome OS Flex
img-9792-2

Related Galleries

A weekend with Google's Chrome OS Flex

22 Photos
Cybersecurity flaws, customer experiences, smartphone losses, and more: ZDNet's research roundup
shutterstock-1024665187.jpg

Related Galleries

Cybersecurity flaws, customer experiences, smartphone losses, and more: ZDNet's research roundup

8 Photos
Inside a fake $20 '16TB external M.2 SSD'
Full of promises!

Related Galleries

Inside a fake $20 '16TB external M.2 SSD'

8 Photos