Acer Altos easyStore

  • Editors' rating
    7.5 Very good
  • Average user rating

Pros

  • Hot-swap SATA disks
  • Easy to configure
  • Built-in RAID protection
  • Bundled DiskSafe Express
  • Client backup and recovery software

Cons

  • Single Ethernet interface
  • Only two DiskSafe client licences
  • Backup and recovery option is Windows only

Like other Network Attached Storage (NAS) appliances, the Altos easyStore from Acer, offers affordable and easy to manage network file sharing — but that’s not all. The other trick up its sleeve is the ability to reserve space for client backups and to enable remote recovery of desktop PCs over the LAN.

A compact and smart-looking appliance, the Altos easyStore is clearly aimed at small businesses wanting to avoid the cost and complexity of a general-purpose file server. To that end, what you get is a small file server running an embedded Linux OS, with a Web-based interface for day to day management and a choice of either 1TB or 2TB of storage across four hot-plug SATA disks. Prices are £425 and £650 (ex. VAT) for 1TB and 2TB respectively.

No special knowledge is required to install the appliance, with a simple Windows console to locate the device on the LAN and a wizard-driven setup routine when you first connect to the management GUI. Windows SMB/CIFS file sharing comes as standard, and there's support for Apple Mac and Linux users, plus a built-in database for user authentication and access control. Optional Active Directory integration on Windows networks is also available, if required.

Software-based RAID facilities also come as standard, starting with RAID 0 where data is striped across all four disks in turn. Compared to simply spanning of the four disks, this can improve performance but doesn’t really add much in the way of redundancy. The RAID 10 option then sees the disks arranged as mirrored pairs, giving 100 per cent redundancy, although you do lose half the available storage space as a consequence.

The most common setup, therefore, is likely to be RAID 5, where recovery information is mixed in with data and striped across all the disks in the array. You can also choose between using all four drives to create the array or just three, with the fourth configured as a hot spare, to take over automatically should one of the working disks develop a fault.

The RAID level is normally set by the wizard during the initial setup, but can changed later — although if you do it later data can be lost if not backed up first. However, unlike a lot of other NAS appliances, changing the disk configuration on the easyStore isn’t a major task — the Acer software taking under five minutes to swap from a linear volume to a RAID 5 setup during our tests. A pair of USB 2.0 ports are also provided to enable external disks to be added should extra capacity be required, however, these can’t be included in an array and are more likely to be used to take backups.

Top ZDNET Reviews

In terms of performance, the Altos easyStore doesn’t quite match what you’d get from a well-specified Windows server, and can’t be used to host applications. That said, you do get a 600MHz Intel 80219 processor, 256MB of RAM and a Gigabit Ethernet interface, so it’s more than enough for a small business network or departmental workgroup looking solely for file sharing. The Seagate Barracuda disks are pretty quick too, and there’s that neat backup trick for those who want it.

This is configured right at the start, when the setup wizard prompts for the available disk space to be divided into two separate areas. One is for shared files, while the other is dedicated to storing backups using the FalconStor DiskSafe Express software bundled with the appliance.

DiskSafe Express uses the iSCSI protocol to take backups of Windows clients that can be remotely booted and recovered from the easyStore appliance in the event of a disaster.


Limited to Windows, the DiskSafe Express client uses the iSCSI protocol to take scheduled backups of the local hard disk. Facilities are available to recover individual files, or even the complete disk image, over the LAN should problems arise. This can take a while to begin with, as a lot of data needs to be copied. However, subsequent updates are very quick and once configured it’s possible to monitor and fine-tune the amount of storage dedicated to each function to better suit your requirements.

We encountered no major problems during our tests, and were particularly impressed by the recovery facilities. You can simply map a network drive to your particular backup data and restore individual lost files yourself, with a built-in PXE server for remote network boot and recovery when all is lost. Note, though, that most buyers will need to purchase extra licences for the DiskSafe client software as only two are included with the appliance as standard.

Small enough to sit on a desk or shelf, the Altos easyStore is simple to set up, and once installed can be largely left alone. It’s also fairly unobtrusive and no more noisy than a desktop PC — so it could be used in an open-plan office if necessary. However, the on/off switch at the front is unprotected and it might be better off tucked away inside a secure, ventilated, cabinet. Other than that, it compares well on price and functionality against competitive products, benefits from a three-year manufacturer’s warranty and, with its bundled backup and recovery software, is well worth considering.

 

Specifications

General
Device Type NAS server
Total Storage Capacity 1 TB
Max Supported Capacity 2 TB
Power Device
Power Provided 220 Watt
Nominal Voltage AC 120/230 V
Frequency Required 50/60 Hz
Type internal power supply
Storage Controller
Supported Devices hard drive
Data Transfer Rate 300 MBps
RAID Level JBOD, RAID 0, RAID 1, RAID 10, RAID 5
Interface Type Serial ATA-300
Type RAID
Camera
Installed Size 8 MB
Storage
Max Supported Capacity 2 TB
Total Storage Capacity 1 TB
Network Storage Type NAS server
Processor / Memory
Processors Installed 1 x Intel 80219 600 MHz
RAM Installed DRAM 256 MB
Flash Memory Installed 8 MB
Max Supported Qty 1
Interface Provided
Qty 1, 2
Interface Ethernet 1000Base-T, USB 2.0
Connector Type RJ-45, Type A
Miscellaneous
Compliant Standards FCC Class B certified
Compliant Standards FCC Class B certified
Networking
Type Network adapter - integrated
Network / Transport Protocol FTP
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Host Connectivity (for SD) Gigabit Ethernet
Network Services Compatibility DHCP
Processor / Memory / Storage
Max Supported Qty 1
Processor
Type 80219
Installed Qty 1
Clock Speed 600 MHz
Manufacturer Intel
Hard Drive
Hot-Swap hot-swap
Form Factor 3.5" x 1/3H
Form Factor (metric) 8.9 cm x 1/3H
Interface Type Serial ATA-300
Installed Qty 4
Data Transfer Rate 300 MBps
Type hot-swap
Type HDD - hot-swap - 3.5" x 1/3H
Video
Video Output none
RAM
Installed Size 256 MB
Environmental Parameters
Min Operating Temperature 32 °F
Min Operating Temperature 32 °F
Max Operating Temperature 104 °F
Humidity Range Operating 10 - 90%
Header
Brand Acer
Product Line Acer Altos easyStore
Model 1TB
Packaged Quantity 1
Compatibility PC
Expansion Bays
Total Qty 4
Free Qty 0
Type hot-swap
Form Factor 3.5"
Form Factor (metric) 8.9 cm
Height 1/3H
Software
Type DiskSafe Express Backup & Recovery (2 client license)
Service & Support
Type 3 years warranty
Service & Support Details
Location carry-in
Type limited warranty
Full Contract Period 3 years
Dimensions & Weight
Width 4.5 in
Depth 9.4 in
Height 8.3 in
Weight 9.92 lbs

Topics: Storage, Reviews

Top ZDNET Reviews

Kick off your day with ZDNet's daily email newsletter. It's the freshest tech news and opinion, served hot. Get it.

Newsletters

You have been successfully signed up. To sign up for more newsletters or to manage your account, visit the Newsletter Subscription Center.
See All
See All