X

Innovation

Home Innovation

New Raspberry Pi add-on: Now you can monitor air pollution indoors and out

Pimoroni's Enviro+ Raspberry Pi hat lets you start to measure the quality of air around your home.

Written by Liam Tung, Contributing Writer June 20, 2019 at 5:11 a.m. PT

A new add-on, or 'hat', is available to attach to the Raspberry Pi computer to create a device that measures air quality, temperature, air pressure, humidity, light, and noise.

Developer

The hat, dubbed Enviro+, comes from Pimoroni, which is pitching the add-on as a cheap alternative to expensive environmental monitoring stations.

With an additional particulate matter sensor, the Pi-based air-monitoring device can be placed just outside a house. Without the additional sensor, it can be used to monitor indoor air characteristics.

SEE: Six in-demand programming languages: Getting started (free PDF)

The Enviro+ itself costs £45 ($57), while the Plantower PMS5003 particulate matter sensor with a cable costs an extra £25 ($32). Pimoroni's recommended setup includes a Raspberry Pi Zero, a 16GB microSD card, and a Raspberry Pi Universal Power Supply unit.

The base Enviro+ includes a single sensor for measuring temperature, air pressure, and humidity. A separate sensor measures light and proximity, and another analog sensor measures gas.

According to Pimoroni, the hat was developed in collaboration with the University of Sheffield in the UK and is intended for users to feed real-time air-quality data from their area to open-data projects like Luftdaten from Germany. That project also offers participants instructions on building their own fine-dust sensor.

Assuming Pimoroni and Plantower devices accurately capture air-quality data, they could allow many users to contribute to a body of data that helps researchers better understand the environment in residential areas across the world.

As Pimoroni points out, the types of particulate matter the PMS5003 promises to measure include dust, pollen, mould spores, smoke particles, organic particles, and metal ions.

Meanwhile, the gas sensor can measure changes in gas concentrations allowing users to ¨tell broadly if the three groups of gases are increasing or decreasing in abundance".

However, it can't measure the concentration of carbon monoxide in parts per million.

Pimoroni has also developed a Python library available on GitHub for controlling the Enviro+, and there's another Python library for reading particulate levels from the particulate sensor.

There is growing interest in low-cost air-quality sensors but scientists, for example, at the US Environmental Protection Agency, are still assessing how accurate they really are.

Plantower sensors are not included in the EPA study. The EPA will be hosting a workshop on July 16, where it will discuss the accuracy of low-cost sensors.

The EU, in its 2017 assessment of low-cost air-pollution sensors, wasn't confident in the accuracy of cheaper equipment.

"Measurements by low-cost sensors are often of minor and questionable data quality [compared with] the results from official monitoring stations as carried out by EU member states in accordance with European legislation and International standards," the EU wrote in its report on the emerging technology.

The base Enviro+ includes a single sensor for measuring temperature, air pressure, and humidity.
Image: Pimoroni

More on Raspberry Pi and single-board computers

Editorial standards

Show Comments

Related

Morento smart air purifier

This $80 smart air purifier has a clever design that makes it super effective

The best Raspberry Pi alternatives available right now: Expert tested

GOTRAX 4 electric scooter

I tested one of the cheapest power stations that made road-tripping a breeze (and it's $250 off)