Hands-on with the Seidio Innocase II Surface for the HTC ThunderBolt

8 of 12
  • 6219462.jpg

    The Innocase II Surface comes in a simple plastic box to keep it safe during transit.

    Make sure to check out my review of the case and story of the fall on my ZDNet Smartphones & Cell Phones blog.

    Caption by: Matthew Miller

  • 6219463.jpg

    The front of the case without my device inserted shows the openings and black felt lining.

    Caption by: Matthew Miller

  • 6219464.jpg

    The back shows the openings and seam where the two pieces come together securely.

    Caption by: Matthew Miller

  • 6219465.jpg

    After pulling the case out of the package you then separate the two pieces so you can insert the ThunderBolt.

    Caption by: Matthew Miller

  • 6219466.jpg

    Now that the ThunderBolt is in the case you can see there are openings for everything so you do not compromise any functionality.

    Caption by: Matthew Miller

  • 6219467.jpg

    As you can see the large kickstand full extends in the case.

    Caption by: Matthew Miller

  • 6219468.jpg

    The kickstand props up the ThunderBolt, even with the Innocase II Surface case placed on the device.

    Caption by: Matthew Miller

  • 6219469.jpg

    The Innocase II Surface adds very little to the ThunderBolt bulk.

    Caption by: Matthew Miller

  • 6219470.jpg

    Here you can see the opening for the microUSB port and kickstand.

    Caption by: Matthew Miller

  • 6219471.jpg

    This photo shows the camera, flash, mic, power button, and 3.5mm headset jack openings.

    Caption by: Matthew Miller

  • 6219472.jpg

    Innocase II Surface image gallery 1

    Caption by: Matthew Miller

  • 6219473.jpg

    Innocase II Surface image gallery 2

    Caption by: Matthew Miller

8 of 12

The Innocase II Surface adds very little to the ThunderBolt bulk.

Caption by: Matthew Miller

8 of 12

Related Topics:

Smartphones Mobile OS Security Hardware Reviews

Related Galleries

    • 1 of 3