How to build an 'All-in-One' PC

9 of 12
  • Introduction

    Introduction

    Why waste valuable desk space on an old-school PC tower when you can combine the PC with the display in a single all-in-one system? While PC OEMs offer countless all-in-one you can choose from, if you are after something special or custom, then building your own is the way to go.

    But what do you need to build your own all-in-one PC? Here's a tour of what you need.

    Image source: Intel.

    Caption by: Adrian Kingsley-Hughes

  • Chassis

    Chassis

    When building a desktop PC, I usually don't list a case because they are very personal to the user. However, when it comes to all-in-one systems, the chassis is all important because this is both the display and the home for all your components.

    For this build I've chosen the Loop L5 LP-2150 chassis, which is based around a 21.5-inch display with a resolution of 1920 x 1080. It supports thin mini-ITX motherboards and LGA1155 processors up to 65W TDP. It features two USB 2.0 ports, and has integrated speakers, a microphone, and a front-facing camera.

    There are many others you can choose from, and if you are interested in shopping around, I suggest you take a look at Intel's Design Component Catalog for inspiration.

    Price: $265.

    Image source: Loop.

    Caption by: Adrian Kingsley-Hughes

  • Processor

    Processor

    There are countless processors that you can choose for for this build. I'm going for something that's middle of the road" the Intel Core i5-3570S.

    This is a quad-core processor which runs at 3.1GHz, and can be turbo boosted to 3.8GHz. It has 6MB or L3 cache and a maximum TDP of 65W, making it ideal for use in the all-in-one PC.

    Price: $205.

    Image source: Intel.

    Caption by: Adrian Kingsley-Hughes

  • Motherboard

    Motherboard

    There are lots of motherboards to choose from that fit the bill, but I've gone for the Intel DH61AG. This board supports LGA1155 Core i3, i5, and i7 processors up to 65W TDP, two RAM slots supporting 16GB of RAM, gigabit LAN support, ten USB 2.0 ports, two USB 3.0, and a pair of SATA ports.

    Everything a good all-in-one PC needs.

    Price: $120

    Image source: Intel.

    Caption by: Adrian Kingsley-Hughes

  • Cooler

    Cooler

    The processor needs a cooler, and since this is not your standard desktop PC, we're going to need a part specific for all-in-one PCs. The Intel HTS1155LP will do the job. This is quite a silent cooler, so you're not going to need ear defenders when using your all-in-one PC.

    Price: $25.

    Image source: Intel.

    Caption by: Adrian Kingsley-Hughes

  • Power Supply Unit

    Power Supply Unit

    Again, regular power supply units won't do the job. We need something far more compact.

    I've chosen the FSP 150-ABAN1, a 150W Energy Star rated unit that will power everything inside out all-in-one system.

    Price: $55.

    Image source: FSP Group USA.

    Caption by: Adrian Kingsley-Hughes

  • Storage

    Storage

    Time to add storage.

    We need a 2.5-inch solid state drive for this build, and I've chosen an old favorite: the 256GB Crucial M4. Solid reliability combined with superb performance.

    Price: $215.

    Image source: Crucial.

    Caption by: Adrian Kingsley-Hughes

  • Networking

    Networking

    This motherboard needs a separate Wi-Fi module. The Intel 62230AN.HMWG will do the job just fine.

    Price: $25.

    Image source: Intel.

    Caption by: Adrian Kingsley-Hughes

  • Memory

    Memory

    Nothing special here, just remember that the board takes notebook SO-DIMM modules, not the DIMM modules that desktop systems take. I've gone for two sticks of 4GB Corsair 204-pin DDR3 1333 memory.

    Price: $42.

    Image source: Corsair.

    Caption by: Adrian Kingsley-Hughes

  • Optical drive

    Optical drive

    Final piece of hardware to throw in is an optical drive. The chassis needs a notebook optical drive, and I've gone for the LG GT60N which is only 12.7mm high.

    Price: $30.

    Image source: LG.

    Caption by: Adrian Kingsley-Hughes

  • Operating system

    Operating system

    Since the motherboard I have chosen supports Windows 8, might as well choose this operating system for the system. If you'd rather Windows 7 or Windows Vista, then feel free to install this instead.

    Price: $99.

    Image source: Microsoft.

    Caption by: Adrian Kingsley-Hughes

  • 0011.jpg

    Total cost of build: $1,081.

    Intel has put together a handy video showing how to put an all-in-one PC together which you might be interested in taking a look at.

    Caption by: Adrian Kingsley-Hughes

9 of 12

Memory

Nothing special here, just remember that the board takes notebook SO-DIMM modules, not the DIMM modules that desktop systems take. I've gone for two sticks of 4GB Corsair 204-pin DDR3 1333 memory.

Price: $42.

Image source: Corsair.

Caption by: Adrian Kingsley-Hughes

9 of 12

Related Topics:

PCs Servers Storage Networking Data Centers

Related Galleries

    • 1 of 3

  • The Zendure SuperTank

    The Zendure SuperTank is an absolute beast. It can fully charge a MacBook Pro in 90 minutes, and can double your battery life. If you have a smartphone such as the iPhone XS, then you can ...