How to get years of service from your rechargeable batteries

There's a lot of voodoo written about how to take care of the rechargeable batteries inside smartphones, tablets or notebooks. While a bit of care can make all the difference, you don't need to treat the battery like a sick pet. It's been designed and built to do a job, so most of the time you can just let it get on with that job.

But with a little bit of care, a rechargeable battery can last years. How much of a difference can taking care of the battery actually make? In my experience, the answer is "a lot." I have both a second-generation iPod nano that I bought around December 2006, and a first-generation iPod touch I picked up in 2008 that still have the original battery installed, and they both work. Eventually, the batteries will wear out, but I won't be complaining that I didn't get my money's worth out of the battery!

So, how do you get the most out of Li-Ion rechargeable batteries?

Every battery has a finite lifespan, and this is given as the "recharge cycle" or "battery cycle." Put simply, this is the number of charge/discharge cycles that a battery is expected to endure before it is no longer fit for service. Some hardware manufacturers publish this figure while others do not. For example, Apple makes this information available, stating that the iPhone battery is designed to retain up to 80 percent of its original capacity at 500 full charge and discharge cycles, while the MacBook Pro or MacBook Air is designed to deliver up to 1000 full charge and discharge cycles before it reaches 80 percent of its original capacity.

You can find out how many times your MacBook's battery have been recharged by clicking on the Apple logo on the menu and then About This Mac, followed by the System Report button. From there, click on Power under Hardware and look for Cycle Count.

For a Windows 8 or Windows 10 system, fire up a Command Prompt and type in:

powercfg /batteryreport

This will generate a report in HTML format and save it into your user account folder.

Some people think that they can dodge this charge and discharge by topping up their battery regularly so the battery doesn't get fully discharged. Unfortunately, as Star Trek's Mr Scott was fond of saying, "you cannae change the laws of physics." If you only let your battery discharge by 25 percent, then doing this four times counts as a single cycle. Same goes if you do five charges after 20 percent discharge, or even 20 recharges after 5 percent discharge.

What you can do though is prevent unnecessary cycles by keeping devices plugged in and charging where possible. However, be smart about this, only leave things plugged in when they are in use, and don't leave them on charge all the time as this can cause heat to build up, which itself will damage the battery.

In other words, don't put the battery through unnecessary cycles. Understand that I'm not saying keep the device on charge all the time -- that would also be bad for the battery because it needs a regular workout to keep its internal chemistry in good condition -- just be aware of wasting cycles.

Some people say that you shouldn't allow a Li-Ion battery to become fully exhausted before recharging, other people say it doesn't matter.

The truth is, with modern Li-Ion batteries it doesn't really matter because their discharge is closely regulated by on-board circuitry.

This used to be an issue with the old NiCd (Nickel Cadmium) batteries because they could discharge to such a point where they would become impossible to recharge (those batteries also didn't like being charged too often and were much more sensitive to temperature). The same goes for lead-acid batteries, which also don't take too well to being discharged too much unless they are rated for "deep cycle."

Room temperature -- around 20°C/70°F -- is the best temperature for charging equipment. However, since we don't all live in climate-controlled rooms, we can extend this range out to 5 to 45°C/41 to 113°F. Anything to either side of this and things can get bad for the battery. This is especially true for charging the battery at temperatures below 0°C/32°F, which can permanently damage the battery.

Subjecting Li-Ion batteries to temperature extremes can also physically damage the battery, causing it to warp or crack. This, in turn, can damage the device containing the battery.

If you want to keep an eye on the temperature of the battery in your Windows or Mac laptop, there are numerous utilities that will let you do that (For Windows, Passmark BatteryMon is excellent, for Mac my choice would be TG Pro).

Drops and falls can damage batteries, causing them to leak a cocktail of corrosive chemicals, all of which are bad for electronics, not to mention your skin should you happen to get any on you.

What should you do if you plan on storing your device for an extended period? The normal instinct is to fully charge the device, but I've found that only charging it up partially -- around 50 percent -- is the best way. Storing a battery in the discharged state can push it to the point where it won't recharge, and storing a battery fully charged can shorten its life.

Long-term storage is best done as close to room temperature as possible. So avoid really cold rooms or keeping the device next to a radiator.

No matter how well you take care of a battery, eventually it will die. Fear not though, because replacing the battery inside most devices is both simple and cheap. Take a look at the great information, parts and tools over on the iFixit site.