NOOKcolor Teardown

12 of 67
  • 487637.jpg

    In November 2010, Barnes & Noble began shipping the NOOKcolor e-book reader. The NOOKcolor offers a 7-inch color screen, touch-screen interface, Wi-Fi support, and runs Android 2.1.

    Follow along as I crack open the NOOKcolor for a look at the hardware inside.

    Check out the 2010 Amazon Kindle and Kindle DX in these cracking open galleries:

    Amazon Kindle DX (Graphite) Teardown

    Amazon Kindle Graphite (3G+Wi-Fi) 2010 Teardown

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487638.jpg

    Although it runs the Android OS, the NOONcolor isn't a full-fledged tablet, like the iPad or Galaxy Tab, but it offers a lot of bang for the buck. The NOOKcolor retails for $249 (US).

    Caption by: Bill Detwiler

  • 487639.jpg

    The NOOKcolor's box folds open. Magnets embedded within the box hold it shut.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487640.jpg

    Inside the NOOKcolor's box are the NOOKcolor itself, the power adapter, USB cable, and Quick Start Guide.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487641.jpg

    According to the device's documentation, the NOOKcolor will not charge when connected to a computer. You must connect it to a power outlet to charge it.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487642.jpg

    The NOOKcolor uses a 5.0V 1.9A power adapter.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487643.jpg

    The NOOKcolor uses a USB cable to charge and connect to a computer.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487644.jpg

    According to Barnes & Noble, the NOOKcolor measures 8.1 inches high, 5.0 inches wide, and 0.48 inches deep. The device weighs approx. 15.8 ounces.

    The LED-backlit, 7-inch (diagonal) color screen delivers a resolution of 1024 x 600 at 169 pixels per inch.

    The NOOK symbol on the front of the device serves as the Home button.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487645.jpg

    On the back of the NOOKcolor are the speaker grill and the microSD card slot (covered by the light-gray plastic cover on the bottom-right corner).

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487646.jpg

    Along the top of the NOOKcolor is the 3.5mm headphone jack.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487647.jpg

    Along the bottom edge of the NOOKcolor is the Micro-B USB port.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487648.jpg

    Along the NOOKcolor's left edge is the power button.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487649.jpg

    Along the NOOKcolor's right edge is the volume up/down button.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487650.jpg

    Along the bottom edge of the NOOKcolor's front are the Home button (the NOOK symbol) and a curious loop. Perhaps we'll see a wrist strap accessory in the future.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487651.jpg

    The NOOKcolor is slightly taller than the original NOOK, but about the same width. As NOOKcolor's entire screen is touch-sensitive, gone is the small color LCD found at the bottom of the original NOOK.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487652.jpg

    The speaker has been moved to the back of the NOOKcolor and the headphone jack has been moved to the top. Only the USB port remains along the bottom edge.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487653.jpg

    The NOOKcolor has a less beveled, more rounded edge than the original NOOK.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487654.jpg

    The two devices are very similar in thickness.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487655.jpg

    Under the light gray cover on the back of the NOOKcolor is the microSD card slot. The device can support up to 32GB of expanded memory.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487656.jpg

    Two Torx T5 screws are hidden under black stickers beneath the microSD slot cover. You'll need to remove both screws before popping off the back cover.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487657.jpg

    With the two external screws removed, you can pop loose the NOOKcolor's back cover. Using a thin metal blade, the can release the small plastic tabs the hold the back cover in place.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487658.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487659.jpg

    With the back cover removed, we get our first look inside. Like the iPad and Galaxy Tab, much of the space inside the NOOKcolor's case is taken up by the battery.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487660.jpg

    Unfortunately, you can't remove the NOOKcolor's battery, or any other component for that matter, without removing the large metal frame that sits atop the display assembly.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487661.jpg

    The NOOKcolor's internal metal frame also serves as the device's external edge. It is held to the display assembly with 10 Torx T5 screws.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487662.jpg

    After removing the metal frame's 10 Torx T5 screws, you'll need to remove three rubber cushions that cover connectors for the battery, power button, and volume up/down button. The cushions are held in place with adhesive. Using a thin metal blade, you should be able to remove the cushions without tearing them or damaging the connector underneath.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487663.jpg

    You'll need to disconnect the battery before removing the metal frame.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487664.jpg

    You'll also need to disconnect the volume up/down button.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487665.jpg

    Lastly, you'll need to disconnect the power button.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487666.jpg

    With the internal screws removed and the cables disconnected, you can separate the display assembly from the metal frame. You could use a thin metal blade or a plastic case opening tool for this task, but I found that my fingernail worked well.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487667.jpg

    With the internal metal frame separated from the display assembly, we get our first good look at the NOOKcolor's printed circuit board (PCB). Before going any further with the display assembly, let's finish our examination of the metal frame and remove the battery.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487668.jpg

    The NOOKcolor's internal metal frame houses the battery, speaker, power button, and volume up/down button.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487669.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487670.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487671.jpg



    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487672.jpg

    The NOOKcolor's battery is attached to the metal frame with two strips of double-sided tape.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487673.jpg

    The NOOKcolor has a 3.7V 400mAh 14.8Wh Li-ion battery. According to CNET's review of the NOOKcolor, you'll get about eight hours of reading on a full charge.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487674.jpg

    With the metal frame removed, we can turn our attention to the NOOKcolor's PCB and display assembly. According to the large sticker on the back of the screen, LG made the NOOKcolor's display.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487675.jpg

    A single Torx T5 screw holds the PCB to the display assembly. You'll need to remove the screw before removing the PCB.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487676.jpg

    Before listing the PCB away from the display assembly you'll need to disconnect the touchscreen connector and display connector. This is the Cypress Semiconductor TMA340 touchscreen controller.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487677.jpg

    The touchscreen connector is attached to the NOOKcolor's PCB with a gated connector and a bit of clear tape.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487678.jpg

    The large display connector is attached to the NOOKcolor's PCB with a large strip of metallic tape and a pop-off connector.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487679.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487680.jpg

    With the screw removed and the display and touchscreen controller disconnected, you can begin lifting the PCB away from the NOOKcolor's display assembly. But, don't pull too hard. The Wi-Fi antenna cable is still attached to the assembly. The antenna wire runs under two thin metal plates. You can either disconnect the antenna wire and pull it out from under the plates, or bend the plates up slightly and pull the wire out. I opted for the latter.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487681.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487682.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487683.jpg

    The NOOKcolor uses an LG Display LD070WS1 (SL)(02) to deliver the 1024 x 600 resolution at 169 PPI.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487684.jpg

    The NOOKcolor's display appears to be held to the front frame with very strong adhesive. As I didn't want to damage the display, I left the two components attached. We can however, take a closer look at the touchscreen controller and display connector.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487685.jpg

    This chip is likely a Cypress Semiconductor TMA340 touchscreen controller. It has the following markings:

    8CTM340-48LQI-01 CYP644895 PHI

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487686.jpg

    Removing the metal tape and translucent blue tape that cover the display connector, we can see the chips underneath and more LG markings.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487687.jpg

    The NOOKcolor's LG Display connector has the several markings, including the following:

    FPC Assy P/N: 6841L-0191A
    Bare FPC P/N: 6850L-0601A
    DESIGNED: 2010.10.08
    DESC: LD070WS1-SL02 FPC Ver1.4

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487688.jpg

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487689.jpg

    Three EMI shields cover most of the interesting chips on the top of the NOOKcolor's PCB.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487690.jpg

    As on the top of the PCB, most of the chips on the bottom are also covered with EMI shields.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487691.jpg

    Luckily, the EMI shields will pop off the PCB with a little effort.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487692.jpg

    This SanDisk SDIN4C1-8G provides the NOOKcolor's 8GB of built-in memory.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487693.jpg

    Texas Instruments (TPS65921B) "Integrated Power Management IC with 3 DC/DC's, 4 LDO's, USB HS Transceiver"

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487694.jpg

    BC0 09K CG6V

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487695.jpg

    17042 0AA3S

    2R2

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487696.jpg

    Although this chip's marking are partially obscured by the EMI support bracket, it is likely a Texas Instruments audio codec.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487697.jpg

    Given the markings on the NOOKcolor's PCB, Foxconn appears to have assembled the device.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487698.jpg

    Now, let's look at the chips on the bottom of the NOOKcolor's PCB.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487699.jpg

    Given its proximity to the Wi-Fi antenna cable, extra shielding, and the traces from the the antenna connector to it, this chip likely provides the NOOKcolor's Wi-fi support.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487700.jpg



    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487701.jpg



    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487702.jpg

    Texas Instruments 08CE7YT LVDS83B

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

  • 487703.jpg

    The NOOKcolor was surprisingly easy to disassemble. It uses standard Torx T5 screws and none of the key components are soldered to the PCB. Despite the ease with witch the NOOKcolor came apart, it really isn't a user-serviceable device.

    Photo by: Bill Detwiler / TechRepublic

    Caption by: Bill Detwiler

    Caption by: Bill Detwiler

12 of 67

Along the NOOKcolor's left edge is the power button.

Photo by: Bill Detwiler / TechRepublic

Caption by: Bill Detwiler

Caption by: Bill Detwiler

12 of 67

Related Topics:

PCs Servers Storage Networking Data Centers

Related Galleries

    • 1 of 3

  • OWC USB-C Travel Dock E

    A single mini dock that allows you to connect, charge, display, network, and import on-the-go, all through a single cable and a single USB-C port.

  • OWC Thunderbolt Dock

    Turn a single Thunderbolt port into four Thunderbolt ports, four USB ports, as well as a port for your SD Card, Gigabit Ethernet, and a combo audio in/out. ...

  • Has your iPhone or iPad stopped charging? Check this first!

    Has your iPhone or iPad suddenly and unexpectedly stopped charging? Or has charging become slow, or is charging intermittent even though the cable is plugged in and the charger is ...