Photos: Blanket tests clear shuttle for re-entry
Wind tunnel
After observing a torn insulation blanket near the window of the Space Shuttle Discovery, personnel at the NASA Ames Research Center, Moffett Field, Calif. tested the material to simulate what would happen during re-entry and determine if space repairs were necessary. To do this, the blanket was subjected to a supersonic wind tunnel.
Test results
The test indicated that little extra damage would occur during re-entry and allowed NASA managers to call off a potential spacewalk to repair the damage.
Thermal blanket damage
Here's a closer look at what the thermal blanket might look like after Discovery's re-entry.
Shuttle repairs
Another problem caused NASA officials to order an emergency spacewalk. Mission Specialist Steve Robinson dangles off an arm from the orbiting space station on Aug. 3, 2005, as he successfully removes protruding thermal protection gap fillers from the heat shield of the Space Shuttle Discovery.
Pulling tiles
Robinson was able to remove the gap fillers by gently pulling them out. If left exposed, the pieces of ceramic-coated fabric could create intense heat during re-entry and put Discovery in jeopardy.
Discovery problems
NASA scientists discovered that two ceramic coated-fabric gap fillers, which are used to prevent hot gas from seeping into gaps between Discovery's protective tiles, were sticking out about an inch from the shuttle's belly. They also observed the torn thermal blanket.